Fish_N_Fool Posted August 13, 2009 Report Share Posted August 13, 2009 Hi, I need to know if any of you have any expertise in making 2 color laminates baits in a pie type injection mold. It feeds plastic from the top and bottom at the same time to get the 2 color baits. But we can't seem to get a good laminate as the plastic is mixing making a swirl bait rather then a top-bottom laminate. Some the plastic mixes almost completely to make a color in-between the 2 starting colors. The molds pour a perfect single color bait. I know it is possible to get good lamitates out of an injection mold. I just need o figure out how. We have tried a few differant thing so far with no luck. If you have any insight on how to fix this please let me know. __________________________________________________________________________________ Inventor of the Worlds strongest fishing knot, the Fish-N-Fool Knot winner of Knot Wars. Quote Link to comment Share on other sites More sharing options...
Delw Posted August 13, 2009 Report Share Posted August 13, 2009 Hi, I need to know if any of you have any expertise in making 2 color laminates baits in a pie type injection mold. It feeds plastic from the top and bottom at the same time to get the 2 color baits. But we can't seem to get a good laminate as the plastic is mixing making a swirl bait rather then a top-bottom laminate. Some the plastic mixes almost completely to make a color in-between the 2 starting colors. The molds pour a perfect single color bait. I know it is possible to get good lamitates out of an injection mold. I just need o figure out how. We have tried a few differant thing so far with no luck. If you have any insight on how to fix this please let me know. __________________________________________________________________________________ Inventor of the Worlds strongest fishing knot, the Fish-N-Fool Knot winner of Knot Wars. I dont ever think a laminate woudl work in a pie mold due to the design, it could if and only if you shot from the bottom and the top simultaneously. for a laminated mold you need to have 2 ports pretty much to shoot from both sides with 2 injectors. this is accmoplished in a few ways but can not be done in a pie mold unless you shoot the other color from the bottom. Delw Quote Link to comment Share on other sites More sharing options...
bear21211 Posted August 13, 2009 Report Share Posted August 13, 2009 I do not know what a pie mold looks like but if you would be willing to post a picture of it I can let you know if our 2 color injectors would work on them or not. We can do laminate worms ,brush bugs, beavers, stiks and others. Quote Link to comment Share on other sites More sharing options...
