Gloomisman Posted August 25, 2009 Report Share Posted August 25, 2009 Have any of you guys done this? I'm wanting too build a bigger one. Something where I can dip about 6-12 heads at a time. Maybe even heat them on a rig of some sort. Pull the whole thing out and dip the heads and go to the next rack and do it again. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted August 25, 2009 Report Share Posted August 25, 2009 Gloomisman, CS Coatings has one on their site. Here are the links. CS Coatings - Standard Fluid Bed CS Coatings - Aluminum Clamping Rack Hope this helps. Quote Link to comment Share on other sites More sharing options...
Gloomisman Posted August 25, 2009 Author Report Share Posted August 25, 2009 Thanks, thats what I was looking for. Do you know what membrane they use for that box? Quote Link to comment Share on other sites More sharing options...
Basseducer Posted August 25, 2009 Report Share Posted August 25, 2009 Sorry I don't. I haven't seen their product or know anyone that has. There might be someone here that has and will chime in. Quote Link to comment Share on other sites More sharing options...
cadman Posted August 26, 2009 Report Share Posted August 26, 2009 Do you know what membrane they use for that box? They use their own as far as I know. PM me your e-mail. Quote Link to comment Share on other sites More sharing options...
VANNDALIZER Posted August 26, 2009 Report Share Posted August 26, 2009 GLman, Try looking at the micro mesh at mcmaster-carr. they have several different options. The bigger fluid bed that CSI sells looks like it is made out f pvc lumber and you could probably make one for a fration of what they charge. Good luck. MAV Quote Link to comment Share on other sites More sharing options...
Gloomisman Posted August 26, 2009 Author Report Share Posted August 26, 2009 GLman,Try looking at the micro mesh at mcmaster-carr. they have several different options. The bigger fluid bed that CSI sells looks like it is made out f pvc lumber and you could probably make one for a fration of what they charge. Good luck. MAV Thats what I'd like to do is make one cheaper and alot less capacity. I cant afford 5lbs of paint in 5-10 colors. LOL. I found their mesh on their site. I would think the one for flour would be perfect. Do you know which mesh would be the best. I was thinking the polyethelyne but not sure. Quote Link to comment Share on other sites More sharing options...
