flippinfool Posted September 7, 2009 Report Share Posted September 7, 2009 I am thinking of adding these two molds to my assortment. 1] The Arky Jig- model # ARK-3-AFC 2] Hidden eye brush jig- model# BSH-3-SA I was wondering how these molds pour. With the hidden eye brush jig mold, does anyone have problems with lead in the jig eye? That's the only potential problem I see with that mold. If anyone uses these, please let me know if there are any negatives. Thanks, flip Quote Link to comment Share on other sites More sharing options...
Jig Man Posted September 7, 2009 Report Share Posted September 7, 2009 I have the Arke and have had it for several years. There are no pouring problems but I don't much like the hook so I don't use it a lot now days. Quote Link to comment Share on other sites More sharing options...
cadman Posted September 8, 2009 Report Share Posted September 8, 2009 flippinfool, I have both of these molds. On the Arky no problem at all. On the brush jig, since I pour harder lead, the jig after it's poured has a tendency to stick to the cavity a bit. Also I personally feel that the 1/4 oz version of this jig is too top heavy with the hoook it calls for. Just my worth. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted September 8, 2009 Report Share Posted September 8, 2009 One more thing. I tape the eyes on my jigs before I dip in powder, since the eye is recessed on the brush jig I can't tape it. I have to spray the powder on and it works just fine. Quote Link to comment Share on other sites More sharing options...
