Frchkn Posted September 30, 2009 Report Share Posted September 30, 2009 Well I am not new to airbrushig i am new to the forum and painting crank's and applying clears on them, I reconize Mark Poulson from westernbass I think I even sold him some drop shot wieghts! I did a search but wasnt able to find anyhing I could buy at a hardware store? My question is what would be a good all around clear/epoxy that I could purchase at lowes,home depot, or even ACE hardware.. I do not want to spend a fortune.. Just looking to give it a try. I would like osmething I could dip.. Quote Link to comment Share on other sites More sharing options...
BobP Posted October 1, 2009 Report Share Posted October 1, 2009 Ace hardware sells Devcon Two Ton epoxy in a 30 ML double syringe. It's sold as a glue but is one of the favorite topcoats among crankbait builders. Brush it on, reverse the bait as it hangs every little while for 45 minutes so the epoxy doesn't sag. Do Not use Devcon 5 Minute epoxy. It cures too fast and will not work. Search on Devcon for tons of further info. Quote Link to comment Share on other sites More sharing options...
Frchkn Posted October 1, 2009 Author Report Share Posted October 1, 2009 Ace hardware sells Devcon Two Ton epoxy in a 30 ML double syringe. It's sold as a glue but is one of the favorite topcoats among crankbait builders. Brush it on, reverse the bait as it hangs every little while for 45 minutes so the epoxy doesn't sag. Do Not use Devcon 5 Minute epoxy. It cures too fast and will not work. Search on Devcon for tons of further info. Thank you Bob, I appreciate the help. Quote Link to comment Share on other sites More sharing options...
