mikefishnfl Posted October 8, 2009 Report Share Posted October 8, 2009 Im using powder to paint my spinnerbaits, but im wanting to airbrush some details into it also. Has anyone used the CS Seal Coat lure finish? I've used E-tex for a while now, but it just takes away from some of the detail in the lure. Im wondering if this will work as well? It appears to be thinner to me from what i've read. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted October 9, 2009 Report Share Posted October 9, 2009 I've used the seal coat from CS and it is a pretty good product but I still like D2T better, the seal coat doesn't have the durability 2 part epoxy has and D2T dries as clear as the seal coat, the advantage to the seal coat is you don't have to mix it but it must be stirred, and it sets up fast, in fact if you go over a spot as it sets up you'll get lines and bubbles which is another reason I went back to the epoxy. Quote Link to comment Share on other sites More sharing options...
cadman Posted October 9, 2009 Report Share Posted October 9, 2009 I've used the seal coat from CS and it is a pretty good product but I still like D2T better, the seal coat doesn't have the durability 2 part epoxy has and D2T dries as clear as the seal coat, the advantage to the seal coat is you don't have to mix it but it must be stirred, and it sets up fast, in fact if you go over a spot as it sets up you'll get lines and bubbles which is another reason I went back to the epoxy. Thanks for the good info smalljaw. Quote Link to comment Share on other sites More sharing options...
