Mags Posted November 9, 2009 Report Share Posted November 9, 2009 Anyone know where I can get some R-bend .045 spinnerbait forms? All I can find are the twisted wire ones. I want to build a compact big spinnerbait like this one http://www.revengebaits.com/products/display/?id=128 but don't want to pay $9 each. Where I want to slow roll them I may loose a few!! I can make a water putty mold and get close enough for my use. Revenge does make a sweet big spinnerbait. Steve Quote Link to comment Share on other sites More sharing options...
gonfishn Posted November 9, 2009 Report Share Posted November 9, 2009 Not real sure where you're gonna find any pre-formed wire forms in .045 size. If I were you, I'd be buying some coil stock in the desired size and making my own forms. The ease and enjoyment realized by doing it yourself will more than make up for any setbacks. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted November 11, 2009 Report Share Posted November 11, 2009 Once you pass.041 you are in musky territory which why you can only find closed eye wire forms, if you want that big of a diameter in an r bend you're going to make to buy the coiled wire and bend it yourself or have a custom order from a place like mustang wire and it'll cost you a pretty penny. Quote Link to comment Share on other sites More sharing options...
Mags Posted November 11, 2009 Author Report Share Posted November 11, 2009 Once you pass.041 you are in musky territory which why you can only find closed eye wire forms, if you want that big of a diameter in an r bend you're going to make to buy the coiled wire and bend it yourself or have a custom order from a place like mustang wire and it'll cost you a pretty penny. Thanks. I'll probably just use the heaviest R-bend I can find. I think I found some .040 the other day while I was looking. I don't want to get into bending my own. Quote Link to comment Share on other sites More sharing options...
