MstormC Posted January 7, 2010 Report Share Posted January 7, 2010 So, I did a search and didn't quite come up with what I was looking for so....I'm going to ask it and someone is going to probably say that it was on such and such a thread. I have a walk the dog type musky bait that I am repainting, with Golden's paint, for my fishing partner. After I get done painting it I would like to put a clear coat on it. The suick's that I have done I have used the Etec and could tell it added some weight but they were weighted baits so I didn't really worry about the three coats that got added. I've heard of the a spar varnish clear coat being used but have not experience with it, nor do I have any experience with the DN. What do you all reccommend for a clear on this type of bait. I know he isn't going to care if his walk the dog lure becomes a sub surface lure but I would rather not have to worry about it either. Any help is appreciated. Quote Link to comment Share on other sites More sharing options...
BobP Posted January 8, 2010 Report Share Posted January 8, 2010 I use DN on bass baits but for musky baits, I'd want epoxy for the added thickness/tooth protection. Epoxy is thicker than polyurethanes, yes, but its specific gravity is only a little higher than water, so several coats of Etex on a musky walking bait shouldn't be much of a performance issue. Quote Link to comment Share on other sites More sharing options...
jamie Posted January 8, 2010 Report Share Posted January 8, 2010 I use etex on those baits with no problem Quote Link to comment Share on other sites More sharing options...
