jwfflipper Posted January 8, 2010 Report Share Posted January 8, 2010 Looking for a better way to twist my hook hangers a line eye Quote Link to comment Share on other sites More sharing options...
gone2long Posted January 10, 2010 Report Share Posted January 10, 2010 What method are you using now? They do make nice little table top mounted wire benders for between $50 & $150. Quote Link to comment Share on other sites More sharing options...
repair Posted January 13, 2010 Report Share Posted January 13, 2010 Check with Jann's netcraft they have a few. Quote Link to comment Share on other sites More sharing options...
redspinlures Posted January 16, 2010 Report Share Posted January 16, 2010 I really like the hagen's bender, ive done about 10,000 spinners on mine, and it's still like brand new. barlows has em. Quote Link to comment Share on other sites More sharing options...
Falky Posted January 19, 2010 Report Share Posted January 19, 2010 get length of s/s mig wire, bend in half with formed loop at top and other two ends in vice. put a cup hook in a cordless drill, cup hook through formed loop of s/s mig wire, little bit of tension on drill and start drilling. should have perfect hook hangers and then cut to length. Adam Quote Link to comment Share on other sites More sharing options...
wcgood Posted February 11, 2010 Report Share Posted February 11, 2010 There is a tool for twisting aircraft safety wire that works extremely well. Wrap cut lengths around a headless nail, clamp down with with tool, 1 1/2 pulls gets you a perfect hook hanger. MILBAR SAFETY WIRE TWISTERS http://www.aircraftspruce.com/menus/to/safetywiretools.html Quote Link to comment Share on other sites More sharing options...
David_Cooksey Posted July 9, 2010 Report Share Posted July 9, 2010 Go to your local lumber yard and look where they have the wires for tying rebar and get the old style wooden handle rebar wire twister and a pair of vise grip pliers. Take and fold over the SS leader wire about 1" then insert coast lock swivel then clamp the wire w/ the vice grip pliers then insert the twister and spin it down into a Eye like on the hook & your finished. Dave Quote Link to comment Share on other sites More sharing options...