LEOLURES Posted January 14, 2010 Report Share Posted January 14, 2010 I am somewhat new to this forum and have been making lures since the early 1990's. I had my shop knocked down this past fall and just got the new shop built. I am in the process of setting up my paint booth and also a seperate room for sealing and priming. Does anyone have any ideas to what type of exhaust fan I should look into? In years past I had a furnace fan I was using for the exhaust. I remember a few months back seeing I believe kingfishes post on his new shop pics but I can't seem to find that topic. Any help would be appreciated. I mainly use a sanding sealer and the fumes are terrible so I need something that will get the fumes out. Thanks for anyones help. Quote Link to comment Share on other sites More sharing options...
silverdoctor Posted January 15, 2010 Report Share Posted January 15, 2010 Leo> consider doing a "search" on shop dust removal (woodworking sites DIY). They give you some ideas on fan types and designs including filters. ken Quote Link to comment Share on other sites More sharing options...
68KingFisher Posted January 16, 2010 Report Share Posted January 16, 2010 (edited) I'll try and attach the link to that thread about my booth. http://www.tackleund..._1entry128200 It seemed to work...lol....I hope it helped....hollar at me if you want to know more. Edited January 16, 2010 by 68KingFisher Quote Link to comment Share on other sites More sharing options...
LEOLURES Posted January 19, 2010 Author Report Share Posted January 19, 2010 thanks KF. Thats the post I needed. I tried doing a search on here but couldn't find it. Thanks again. Quote Link to comment Share on other sites More sharing options...
