edw Posted January 14, 2010 Report Share Posted January 14, 2010 I want to seal basswood lures I have turned on the lathe. I will be drilling holes in these bodies from front to back so I'm thinking some type of sealant that is very thin and could be used in a dipping method. Most outdoor wood sealers have a oil in them that prevents paint sticking. Anybody have any ideas? Quote Link to comment Share on other sites More sharing options...
Toxicbaits Posted January 14, 2010 Report Share Posted January 14, 2010 I use either a spay finish/sealer from zinnser it comes in a yellow spray paint can or minnwax wood hardener.. the wood hardener soaks into the wood pretty well and i just put a light sanding on it after it dries. havent had a problem yet. Quote Link to comment Share on other sites More sharing options...
edw Posted January 14, 2010 Author Report Share Posted January 14, 2010 I use either a spay finish/sealer from zinnser it comes in a yellow spray paint can or minnwax wood hardener.. the wood hardener soaks into the wood pretty well and i just put a light sanding on it after it dries. havent had a problem yet. Quote Link to comment Share on other sites More sharing options...
