empire247 Posted February 12, 2010 Report Share Posted February 12, 2010 i just got the hand injector from del this week and so far i have been able to use it with no problems on del's , bob's and basstackle molds and molds from k molds, since this is the only injector i have used i cant really say how it compares to others but i havent had any problems using it on my hand pour molds. brett Quote Link to comment Share on other sites More sharing options...
Frank Posted February 12, 2010 Report Share Posted February 12, 2010 I dont know what injector you got from del but now that you have one of his dont expect alot from any others on the market cause his is real good and the quality is very aparent. I have two now and the small two oz one does fit bears like a glove. I have one of bears also and the two oz dels is alot alike in size. I made a one oz one that is ok but the time spent is way to long. And dave If you are still reading this thread jacobs baits has a new injector on ebay to fit his molds. I guess there was alot of questions so he come up with one of his own. Kind of pricey though. Especially if you can get a del for under forty bucks with that kind of quality. But if you see it it has a foam insulator around it , seems like a good idea. I think it is great to see all the ideas that people come up with. Next is one from basstackle. i just got the hand injector from del this week and so far i have been able to use it with no problems on del's , bob's and basstackle molds and molds from k molds, since this is the only injector i have used i cant really say how it compares to others but i havent had any problems using it on my hand pour molds. brett Quote Link to comment Share on other sites More sharing options...
Saugerman Posted February 16, 2010 Report Share Posted February 16, 2010 I dont know what injector you got from del but now that you have one of his dont expect alot from any others on the market cause his is real good and the quality is very aparent. I have two now and the small two oz one does fit bears like a glove. I have one of bears also and the two oz dels is alot alike in size. I made a one oz one that is ok but the time spent is way to long. And dave If you are still reading this thread jacobs baits has a new injector on ebay to fit his molds. I guess there was alot of questions so he come up with one of his own. Kind of pricey though. Especially if you can get a del for under forty bucks with that kind of quality. But if you see it it has a foam insulator around it , seems like a good idea. I think it is great to see all the ideas that people come up with. Next is one from basstackle. I just bought my first injector,I bought it from Bears,my question is this. Do the o-rings wear out very quick,,and if so, can you use any o-rings that size? I realize alot depends on the amount of use it gets has a lot to do with it,but just wondered if I need to be getting some extras. Saugarman Quote Link to comment Share on other sites More sharing options...
Frank Posted February 16, 2010 Report Share Posted February 16, 2010 I just bought my first injector,I bought it from Bears,my question is this. Do the o-rings wear out very quick,,and if so, can you use any o-rings that size? I realize alot depends on the amount of use it gets has a lot to do with it,but just wondered if I need to be getting some extras. Saugarman To be honest I have not been doing this long but to have some spares would not be a bad thing cause you only have one. And I think they are high heat O rings. Cant cost very much. Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted February 16, 2010 Report Share Posted February 16, 2010 To be honest I have not been doing this long but to have some spares would not be a bad thing cause you only have one. And I think they are high heat O rings. Cant cost very much. You can spare o-rings on his site. I think you can shoot many of thousands of baits before you would need new ones. Shoot bear an e-mail Quote Link to comment Share on other sites More sharing options...
Saugerman Posted February 16, 2010 Report Share Posted February 16, 2010 You can spare o-rings on his site. I think you can shoot many of thousands of baits before you would need new ones. Shoot bear an e-mail Thanks for answering my question, I would have thought that they would wear very fast,with the heat of the plastic.. Saugarman Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted February 16, 2010 Report Share Posted February 16, 2010 Thanks for answering my question, I would have thought that they would wear very fast,with the heat of the plastic.. Saugarman I also put a few drops of worm oil on them before each day's use. It makes it slide very easily Quote Link to comment Share on other sites More sharing options...
