RiverMan Posted February 12, 2004 Report Share Posted February 12, 2004 I normally only use one coat of Devcon on my baits but at times will see thin areas that could probably use a second covering. Just curious as to what others are doing. Thx. jed Quote Link to comment Share on other sites More sharing options...
BassNator 1 Posted February 12, 2004 Report Share Posted February 12, 2004 I Use 2 coats! Cody Quote Link to comment Share on other sites More sharing options...
Hoosierdaddy Posted February 12, 2004 Report Share Posted February 12, 2004 I use it as a primer and then as a topcoat... so two coats for me Quote Link to comment Share on other sites More sharing options...
Skeeter Posted February 13, 2004 Report Share Posted February 13, 2004 Devcon is tough. So as long as the area is covered then the bait is protected. If you think that you need a second coat to help the looks of the bait then you can do that with no problem. But be careful.... If you weight your baits close then the second coat of Devcon may add too much weight to the bait and could cause the bait to slowly sink, especially in cold water. Skeeter Quote Link to comment Share on other sites More sharing options...
