brivera88 Posted February 17, 2004 Report Share Posted February 17, 2004 I can pour worms and such but recently have been very interested in making my own cranks or buying the bodies and doing everything else needed to finish a black body. Is there any web-site or own assembler here that knows of a site that sells packs of crank bait bodies unpanited and such? I really wanna start my owna ssemble line of cranks but need some help from the experienced. Quote Link to comment Share on other sites More sharing options...
CatchingConcepts Posted February 17, 2004 Report Share Posted February 17, 2004 bout the best advice I think I could tell you is to start by reading back through all the posts here, They are some of the most informative and well written stuff I have seen, many would answer all the questions you have, from shaping bodies to top coat, its all here with links. Best to just start wading through it and coppying all stuff that applies to a folder for quick reference later. OR you can use the search to search by keyword, ie BODIES or weighting, etc... welcome to you new addiction! Quote Link to comment Share on other sites More sharing options...
brivera88 Posted February 17, 2004 Author Report Share Posted February 17, 2004 thanks for your reply, did'nt even think of searching through the archives. Thanks again. Quote Link to comment Share on other sites More sharing options...
bassnattractin Posted February 17, 2004 Report Share Posted February 17, 2004 this might be a stupid question, but how do i search the acrhives? Quote Link to comment Share on other sites More sharing options...
Art Brush Posted February 17, 2004 Report Share Posted February 17, 2004 There's a "Search" link at the top of this page just below the Tackle making tutorials link. Quote Link to comment Share on other sites More sharing options...
RiverMan Posted February 17, 2004 Report Share Posted February 17, 2004 Here is a couple of tutorial links that will give you a good "foundation". Warning, this hobby is very addictive!! http://home.mchsi.com/~djaroscak/buildinglure.html http://luresonline.com.au/ I tried to paste Chip's link too but the links I had saved aren't working. Have fun! jed Quote Link to comment Share on other sites More sharing options...
Big Splash Posted February 17, 2004 Report Share Posted February 17, 2004 Check the 'ONLINE SHOP', this page right. Quote Link to comment Share on other sites More sharing options...
out2llunge Posted February 17, 2004 Report Share Posted February 17, 2004 http://www.luremaking.com sells unpainted crank bodies. Prices in CDN $. Quote Link to comment Share on other sites More sharing options...
