CatchemCaro Posted May 1, 2010 Report Share Posted May 1, 2010 I have never seen a picture or drawing of how the wire is connected to the hook where it's hidden under the lead head of the spinner bait. Is there any good videos on walking a person through the steps it takes to make a spinner bait from scratch? I make wake bait and would like to add a line of spinnerbaits to my product line. Any information would be great. Thanks Rich Quote Link to comment Share on other sites More sharing options...
diemai Posted May 1, 2010 Report Share Posted May 1, 2010 (edited) @ CatchemCaro Check out My link , on the entry page there(it's a Canadian component supplier) look for the "Free Downloads" section , download the PDF file "The Canadian Guide to Luremaking" , on page 40 there is a chapter about spinnerbaits . There also is a site My link, maybe , that there is some info there as well , ....but I can't really tell . You may also try to obtain the book "LUREMAKING (the Art and Science of Spinnerbaits , Buzzbaits , Jigs and Other Leadheads)" by A. D. Livingston , issued by Ragged Mountain Press , Camden , Maine , 1994 , ISBN 0-070-038152-6 . Have you tried the search function on "YouTube" as well , .........type in term "spinnerbait" , maybe you'd be lucky to find something ? good luck , diemai Edited May 1, 2010 by diemai Quote Link to comment Share on other sites More sharing options...
cadman Posted May 1, 2010 Report Share Posted May 1, 2010 I have never seen a picture or drawing of how the wire is connected to the hook where it's hidden under the lead head of the spinner bait. Is there any good videos on walking a person through the steps it takes to make a spinner bait from scratch? I make wake bait and would like to add a line of spinnerbaits to my product line. Any information would be great. Thanks Rich Rich, PM me your e-mail, and I can send you a picture of the wire attached to the hook in the mold. Quote Link to comment Share on other sites More sharing options...
pirkfan Posted May 2, 2010 Report Share Posted May 2, 2010 (edited) I have never seen a picture or drawing of how the wire is connected to the hook where it's hidden under the lead head of the spinner bait. Is there any good videos on walking a person through the steps it takes to make a spinner bait from scratch? I make wake bait and would like to add a line of spinnerbaits to my product line. Any information would be great. Thanks Rich Simple answer is that it's just a hook bent in the end of the wire which in turn is stuck through the eye of the fishhook, you can use a pair of pliers to close the wire around the eye of the fishhook somewhat to hold it together until the lead head is poured. Here's a link to Do-It's premade wire forms http://www.do-itmolds.com/prod_spinner_jig_forms.aspx?c=130 Edited May 2, 2010 by pirkfan Quote Link to comment Share on other sites More sharing options...
CatchemCaro Posted May 7, 2010 Author Report Share Posted May 7, 2010 Thanks guys. Some good information. I can't wait to make a blade. Rich Quote Link to comment Share on other sites More sharing options...
