kelly Posted May 5, 2010 Report Share Posted May 5, 2010 How many of you make a spinner out of speck on purpose. Looking for another action and failed. Having to bend the spinner blade to get it to spin. My question is how do you bend your blades to get them to spin reliably. On the last one I used a blade that was to small and a Colorado blade at that, but I had to burn that baby in to get it to flash. I bent it slightly on one side but more on the bottom opposite of the eye. It helped but now I started another madness and I have blades bent every witch way. How many of your bend your factory blades. Quote Link to comment Share on other sites More sharing options...
redwolf Posted May 5, 2010 Report Share Posted May 5, 2010 I have never had to bend a blade,something must be wrong on how the blade is installed on the shaft.Do you have a pic of your spinnerbait? Quote Link to comment Share on other sites More sharing options...
kelly Posted May 6, 2010 Author Report Share Posted May 6, 2010 No pic. I was just curios if there are blade tweaker out there or am I alone. The blade was to small for the size of the lure. I was trying to get a smaller flash but a slow retrieve so I could get the depth I was after. It was an inline spinner. I even have a spinner with the blade bent in an L shape and it spins. Just brain storming about blade design. Quote Link to comment Share on other sites More sharing options...
