Roughneck1860 Posted May 9, 2010 Report Share Posted May 9, 2010 I got back into doing my own jogs again this year for Walleye as well as Muskie and am looking for some painting info. Paints have come along way since I made my own years ago but I've come up with what seems like a good plan. My main problem before was getting my base coat to stick to the lead. Well I've been playing around with powder coating and it seems to work great. I've even made my own small size fluid bed which makes it even better. I am goes to use acrylics for my paints for detail work. What about a clear coat. What works well over acrylics that will hold up fairly well on jig? Thanks Tim Quote Link to comment Share on other sites More sharing options...
psv Posted May 10, 2010 Report Share Posted May 10, 2010 Hi Tim, My choice would be Devcon 30 minutes epoxy. Quote Link to comment Share on other sites More sharing options...
Roughneck1860 Posted May 10, 2010 Author Report Share Posted May 10, 2010 I will check it out. Thanks Tim Quote Link to comment Share on other sites More sharing options...
cadman Posted May 10, 2010 Report Share Posted May 10, 2010 Hi Tim, My choice would be Devcon 30 minutes epoxy. Tim I second this post. I personally believe that this is the hardest finish out there, after it cures. You have to try it out. Quote Link to comment Share on other sites More sharing options...
