Jump to content
CaptRodney

Rtv Molds

Recommended Posts

Ok got some aeromarine rtv silicone made a few 1 pc molds and turned out great so i moved to a 2pc mold I got a brand new nonstick square baking pan and sprayed it with mold release from aeromarine. once it setup i sprayed the top and other half of the exposed lures and poured second layer of rtv. So I let it set top layer peeled off but for the life of me i cannot get the bottom layer to release it is trying to tear if ipull too hard on the mold shall i toss the pan and start over? Any suggestions?

Link to comment
Share on other sites

Ok got some aeromarine rtv silicone made a few 1 pc molds and turned out great so i moved to a 2pc mold I got a brand new nonstick square baking pan and sprayed it with mold release from aeromarine. once it setup i sprayed the top and other half of the exposed lures and poured second layer of rtv. So I let it set top layer peeled off but for the life of me i cannot get the bottom layer to release it is trying to tear if ipull too hard on the mold shall i toss the pan and start over? Any suggestions?

Might try a cake spatula to cut it loose if you can get under one of the edges.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top