rugbyfisherman Posted June 24, 2010 Report Share Posted June 24, 2010 I am just starting out and ordered my first stik bait mold. I am hoping that I could get some tips on making resin molds to try some other baits out - I don't really want to spend hundreds on tubes, cray, lizzard molds just yet. I know that some people use DAP to make molds but I am thinking resin molds can't be too hard to make. Thanks for any tips, Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted June 24, 2010 Report Share Posted June 24, 2010 (edited) I found this by typing in "making resin molds" in the search engine above. There are plent more. i just grabbed the first one. Hope this helps. http://www.tackleund...http://www.tackleunderground.com/community/topic/18168-easy-resin-mold/ Edited June 24, 2010 by 152nd Street Baits Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 24, 2010 Report Share Posted June 24, 2010 Man, he makes it look easy. Quote Link to comment Share on other sites More sharing options...
rugbyfisherman Posted June 24, 2010 Author Report Share Posted June 24, 2010 I am assuming securing the master is the hardest part. I have a neat swim-bait that I purchased that I thought I could copy myself. I think I would loose a portion of the bait. Quote Link to comment Share on other sites More sharing options...
gone2long Posted June 27, 2010 Report Share Posted June 27, 2010 It is easy, just make sure your adhesive is not heat sensitive i.e. will melt with the heat applied, on my 1st try 4 years ago working with resin the heat from curing caused 1 of the mounted baits to let go and floated to the top of the resin Quote Link to comment Share on other sites More sharing options...
