Nordmann Posted January 24, 2012 Report Share Posted January 24, 2012 Hello Reaper, thanks alot for sharing! Quote Link to comment Share on other sites More sharing options...
jwfflipper Posted January 26, 2012 Report Share Posted January 26, 2012 Thanks for sharing!!! Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted January 27, 2012 Report Share Posted January 27, 2012 Reaper - interesting solution to the lure holder on the drier. Good share. Dave Quote Link to comment Share on other sites More sharing options...
Thinman13 Posted September 21, 2013 Report Share Posted September 21, 2013 What kind of machine is that they stick the balsa blanks into and it turns the lure for u? I think u program the design and it just does the rest. I have seen them on youtube and was wondering what they cost and where u would buy them? Quote Link to comment Share on other sites More sharing options...
agarrett Posted October 31, 2013 Report Share Posted October 31, 2013 Thinman, that's the million dollar question. That's also part of the reason why people are just building them. Quote Link to comment Share on other sites More sharing options...
Thinman13 Posted October 31, 2013 Report Share Posted October 31, 2013 I bet they are expensive. 1 Quote Link to comment Share on other sites More sharing options...
JunebugsCustoms Posted December 29, 2013 Report Share Posted December 29, 2013 I make or have made a lot of the machines I use to build lures. Some noteables are: A mini wood lathe from an old sewing machine An epoxy mixer using some PVC parts and a BBQ Rotisserie motor An epoxy drier using a Ronco Showtime rotisserie and a powder coat fluid bed using assorted air fittings and PVC pipe Some, like the lathe, while they worked well, have been since replaced. Others, like the driers and mixer, etc I still use nearly every day. I am far too cheap to spend the silly money these places charge for their stuff when I am more than capable of building my own lol. 1 Quote Link to comment Share on other sites More sharing options...
jawjacker Posted July 1, 2014 Report Share Posted July 1, 2014 guys you can cut bodies on a cnc machine..........they will be 2 part bodies.......one will run around 3 grand for them and they do a gr8 job Quote Link to comment Share on other sites More sharing options...
