Kris Posted July 29, 2010 Report Share Posted July 29, 2010 Was wondering how you accomplish this look ? I figure its something along the same lines as when you put a felt tip pen on paper and let the ink spread out. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted July 30, 2010 Report Share Posted July 30, 2010 I think Pete (Hazmail) gave a "how to" on something like this. You might do a search of his posts to see if you can find it. Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted July 30, 2010 Report Share Posted July 30, 2010 Wasn't easy to find: http://www.tackleunderground.com/community/topic/2594-hard-bait-cookbook/page__st__20 post No 32. Here is a vid that was posted by Spoopa: different technique, with a slightly different effect.Dave Quote Link to comment Share on other sites More sharing options...
MuskyGary Posted July 30, 2010 Report Share Posted July 30, 2010 Wow!! That opens up a whole new type of painting plugs that I had never thought about. Just have to be careful not to move the plug until it is dry. Quote Link to comment Share on other sites More sharing options...
Kris Posted July 30, 2010 Author Report Share Posted July 30, 2010 Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints? Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? Quote Link to comment Share on other sites More sharing options...
Vodkaman Posted July 30, 2010 Report Share Posted July 30, 2010 Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints? Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? Good question. First thoughts would be no, because the paint is water based, it would dissolve into the droplet. But you have to think deeper and understand the paint. My guess would be that it has a chance. The paint pigments are solids, so such tiny fragments should not pierce the surface tension of the droplet. I hope you try it and report back. I could be totally wrong. Dave Quote Link to comment Share on other sites More sharing options...
atrophius Posted July 30, 2010 Report Share Posted July 30, 2010 Good question. First thoughts would be no, because the paint is water based, it would dissolve into the droplet. But you have to think deeper and understand the paint. My guess would be that it has a chance. The paint pigments are solids, so such tiny fragments should not pierce the surface tension of the droplet. I hope you try it and report back. I could be totally wrong. Dave I was thinking about the surface tension also, I think it should work really. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted July 31, 2010 Report Share Posted July 31, 2010 I'm wondering what would happen if you thinned your paint quite thin, applied small drops of the thinned paint and then wrapped plastic wrap over it. If wrapping the plastic over it provided the random shapes it could be allowed to dry enough to remove the plastic wrap. Just letting the brain wander. Quote Link to comment Share on other sites More sharing options...
hazmail Posted July 31, 2010 Report Share Posted July 31, 2010 Do you think the Water Droplet Effect (as shown in the YouTube vid) would would with water based paints? Since you are using water to gain the effect and then spraying a water based paint onto the water droplets?? Kris - I think you will find the 'water droplet's' is done with enamel paint, not sure weather thinners based or oil based, but suspect thinners, the pigment spray would float on the drops and drop around the sides - Oil based enamel would also float on the droplets and probably drop, BUT would take ages to dry. .Pete Quote Link to comment Share on other sites More sharing options...
CL Rods Posted August 13, 2010 Report Share Posted August 13, 2010 I'm wondering what would happen if you thinned your paint quite thin, applied small drops of the thinned paint and then wrapped plastic wrap over it. If wrapping the plastic over it provided the random shapes it could be allowed to dry enough to remove the plastic wrap. Just letting the brain wander. Depending on the base coat and whether it is durable enough or if you have put an intermediate clear on it, the technique you just mentioned is how you create a marblized paint job. However, you do not let it dry under the plastic and you pretty much remove it right away. HOK makes a thinned silver pearl paint just for doing this and it works absolutely as advertised. Quote Link to comment Share on other sites More sharing options...