Jump to content
Bass-Boys

Sore Throat

Recommended Posts

Yes!!! I poured a while without a mask when i first started and ended up with really sore throat, bleedigng nose, dizzyness, nausea etc... Bought a 3m mask for painting and it helps but still not happy pouring, I think a very powerful extracto fan is vital if you are pouring as your health is more important than baits!!

I actually stopped pouring until I am able to make a proper work shop with extactor fan and proper ventilation.

Take care

Simon

Link to comment
Share on other sites

If my wife enters the shop, her airway closes (reactive asthma) and she can't breath. The smoke is toxic to us for sure and definitely can cause throat irritation.

Exhaust fan and mask should be used at all times in my opinion. Read the MSDS for further information.

Jim

Link to comment
Share on other sites

I wonder about the "green" plastic that LC sells. It has no phthalate chemicals. Supose to be more environmentally friendly? I have a face mask that I wear for lead pouring, but I usually don't wear it for plastic pouring. I usually don't pour more than six or seven molds at a time and I keep the doors to my shop wide open. It would not hurt me to wear the mask, but its so hot with it on.

Link to comment
Share on other sites

If you are going to pour on a regular basis, you need to take the proper precautions. If not, you will most likely pay for it later on with health issues. You should not be breathing those fumes at all. Don't blow off the symptons you are getting, if any, to something else. If you didn't have these issues before you started pouring.........where do you think they came from? As far as headaches go, drinking lots of water does help alleviate that.

Link to comment
Share on other sites

I have never had the sore throat before . I have been pouring for apx. 4 years..Burning eyes,,, head aches,,yes, but not the throat,, but last month I poured much more than usual and I think that was it..I use a fan in the window and in the ceiling..and have a 3M mask that I only use 90% of the time..I still feel I need better vent & to wear the mask 100%..its also been in the 90s and I pour in the upstairs of my garage..both windows open.. 1 fan in 1 window and 1 fan in the ceiling.apx. 95-100 degrees up there..

I work all day in air conditioning ( meat cutter ) and the house has air.. The combo of the pouring and the air...maybe..??

Link to comment
Share on other sites

I pour in a 3 bay garage and keep all garage doors open and a fan blowing indirectly while playing with plastic. I think ventilation is a key regardless of what you do.

I also try to pour enough so I don't have to pour again for a couple weeks. 1 gallon of plastic lasts me for a year though. I have no experience getting deeper in it than that

Link to comment
Share on other sites

You should be fine with that ventilation and using 1 gallon a year..

( we hope? guys have not been doing this for a lot of years so we mite not know yet )

I do not consider my self a large pouring operation at all..

part timer..

I do not have a clue how much the bigger hand pourers pour ??

like Jim @ ghost baits must go through a lot of plastic..

I have poured almost 75 gallons in 4 years.

Link to comment
Share on other sites

I pour outside, in front of my open garage on my driveway. Even with it being open, I'm careful not to breath the fumes.

I have a box fan hung at the back of my garage that I put on when I'm pouring, because the microwave is on top of my table saw inside the garage itself, and there are fumes when I'm heating and stirring the plastic.

If it's too cold or wet to pour outside, I don't pour.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top