bigbrown Posted March 3, 2004 Report Share Posted March 3, 2004 Can anybody tell me what kind of glue is the best for holding the plastic lip in?? where can you get this glue if there is some?? thanks for the help Quote Link to comment Share on other sites More sharing options...
u63405 Posted March 3, 2004 Report Share Posted March 3, 2004 best glue would have to be the five minute Devcon 2 ton. You can find it at Ace, Walmart, Home Depot, etc. Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted March 3, 2004 Report Share Posted March 3, 2004 most definately devcon 2 ton.... You may ruff the gluing surface up just a bit for a little extra grip. Chip Quote Link to comment Share on other sites More sharing options...
bigbrown Posted March 4, 2004 Author Report Share Posted March 4, 2004 thanks for the help guys that is really helpful!!!! Quote Link to comment Share on other sites More sharing options...
Skeeter Posted March 4, 2004 Report Share Posted March 4, 2004 Devcon 5 minute epoxy. The reason I say 5 minute is because with the long drying stuff, as it cures it can twist the lip in the slot as the epoxy cures and sets. 5 minute sets quick and you can monitor the position of the lip as it sets. After 5 min. of putting in the lip and keeping it straight, it is set for life. Skeeter Quote Link to comment Share on other sites More sharing options...
bigbrown Posted March 5, 2004 Author Report Share Posted March 5, 2004 thanks all you!!! skeeter you have been so helpful in all my questions, thanks Quote Link to comment Share on other sites More sharing options...
Skeeter Posted March 5, 2004 Report Share Posted March 5, 2004 My pleasure. That is what we are all here for. Helping each other is what this site is all about and lets Jerry and his crew know that all of their hard work in keeping this site up and running is very appreciated and recognized. Skeeter Quote Link to comment Share on other sites More sharing options...
