fishinnbama Posted November 29, 2010 Report Share Posted November 29, 2010 when photofinishing baits after yea print the pic do yea have to spray any thing on pic so the ink doesn't run when you clear it any help would be aprreciated thanxs in advance mike Quote Link to comment Share on other sites More sharing options...
Big Bass Man Posted November 30, 2010 Report Share Posted November 30, 2010 On 11/29/2010 at 5:47 PM, fishinnbama said: when photofinishing baits after yea print the pic do yea have to spray any thing on pic so the ink doesn't run when you clear it any help would be aprreciated thanxs in advance mike I use stick glue to do the foil baits, doesnt make a big mess like the spray . The ink will not run after it has dried !! Quote Link to comment Share on other sites More sharing options...
fishinnbama Posted December 1, 2010 Author Report Share Posted December 1, 2010 On 11/30/2010 at 1:01 AM, Big Bass Man said: I use stick glue to do the foil baits, doesnt make a big mess like the spray . The ink will not run after it has dried !! okay thanxs big bass man i really appreciate it Quote Link to comment Share on other sites More sharing options...
floydfire Posted December 2, 2010 Report Share Posted December 2, 2010 On 12/1/2010 at 5:15 PM, fishinnbama said: okay thanxs big bass man i really appreciate it I use elmers spray glue and glue to the foil. I spray a bunch on the foil and so the paper is very wet with glue so the foil color bleeds through more. push from the middle out of picture with some type of credit card Quote Link to comment Share on other sites More sharing options...
Nathan Posted December 3, 2010 Report Share Posted December 3, 2010 Yes you have to spray a sealer over your decal before it is applied or the ink may run on you...I just use a can of clear laquer from Walmart.Spray a couple thin coats,and let them dry..Nathan Quote Link to comment Share on other sites More sharing options...
rofish Posted December 6, 2010 Report Share Posted December 6, 2010 If you use an ink jet printer, you do not have to worry about the ink running in case you use solvent based clearcoats, because the ink is water based, so you have to take care not to drop water on the image, because water will make the ink run. I have used epoxy thinned with solvent, also propionate solution as clearcoats. No problem at all. I have also printed some images with a color laser printer, and after clearcoating the image was very sharp. I do not speak about decal paper here, which I have not used yet, and as far as I could get from the information here on TU, spraying a sealer on the image is part of the technological process. Quote Link to comment Share on other sites More sharing options...
