blanx Posted January 24, 2011 Report Share Posted January 24, 2011 how hard would it be to modify the tip of the bear injector to a locking pin? I have thought about cutting a groove in to the injector body and tapping a small screw in to the tip. that way all i have to do is slide and twist like Bass tackles. has anyone made a modification like this? ideas or tips would be nice. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted January 24, 2011 Report Share Posted January 24, 2011 At first I thought about doing that. I was working in too much of a hurrn and I would pop the tip out into the plastic and have to dig it out ranting and raving. But after I started handling them a bit slower and "easier" I haven't need to make any mods. Now I like being able to get the plunger out for a quick cleanup as the molded baits set up for extraction. Quote Link to comment Share on other sites More sharing options...
TBaits Posted January 24, 2011 Report Share Posted January 24, 2011 I have actually owned both injectors and have to say that I did like the added feature of BT's. I actually sold both of mine and went with the bigger 16 oz napa suction gun and it has a screw on tip and I really have had great luck with that set-up. Someone on here I remember did make the addition to a Bear's injector, but don't remember who it was. You might try a search. Quote Link to comment Share on other sites More sharing options...
Frank Posted January 24, 2011 Report Share Posted January 24, 2011 Blanx send it to me and I will take care of it for you. Frank Quote Link to comment Share on other sites More sharing options...
