Joey Watts Posted April 8, 2011 Report Share Posted April 8, 2011 Wondering if anybody has any experience shooting their water base paints. I am trying to shoot it on lead using a Pasche Siphon Feed Brush and having all kinds of trouble with it clogging. CSI sent me stuff to pour in the paint that was suppose to solve this problem but did not help much at all. When shooting with a pretty high pressure it is not to bad. Turn the pressure down so that I can try and do some type of detail. Paint 3 or 4 peices and have to clean the tip of my brush. Thanks Quote Link to comment Share on other sites More sharing options...
YakAngler81 Posted April 9, 2011 Report Share Posted April 9, 2011 Wondering if anybody has any experience shooting their water base paints. I am trying to shoot it on lead using a Pasche Siphon Feed Brush and having all kinds of trouble with it clogging. CSI sent me stuff to pour in the paint that was suppose to solve this problem but did not help much at all. When shooting with a pretty high pressure it is not to bad. Turn the pressure down so that I can try and do some type of detail. Paint 3 or 4 peices and have to clean the tip of my brush. Thanks heres a older thread that might help some. http://www.tackleunderground.com/community/topic/21974-csi-vinyl-paint-and-airbrushing/page__p__163815__hl__%2Bcsi+%2Bpaint__fromsearch__1#entry163815 Quote Link to comment Share on other sites More sharing options...
