AlbyDogGone Posted March 23, 2004 Report Share Posted March 23, 2004 OK I just got in some hi lite powder coloring and I was just wondering how it works. I only ordered it to experiment and mostly out of curiosity. So how do these colors work? What sort of ratio do you mix and what type of "effect" do these colors produce? No directions whatso ever came with it. Any help is always appreciated... Thanks Alby Quote Link to comment Share on other sites More sharing options...
alsworms Posted March 23, 2004 Report Share Posted March 23, 2004 Alby, go very very light on that stuff. I use about 1/8 teaspoon per 4 ounces of plastic. A good way to start is try blue hi-lite with a light smoke color. That will really show the effects. It will look smoke until you hold it up in the light. The blue should really stand out in sunlight or under a bulb. Hope this helps. Chris Quote Link to comment Share on other sites More sharing options...
Mercury Posted March 23, 2004 Report Share Posted March 23, 2004 The green hi-lite also can make a june bug color without flakes. Quote Link to comment Share on other sites More sharing options...
AlbyDogGone Posted March 25, 2004 Author Report Share Posted March 25, 2004 I just poured some grubs last night just to see how it works, I really like the results. I took your advice and only used a tiny bit, but I like the effect. I used a gold hi lite, other colors probly more suitable but they looked good for first try. Thanks for the advice Tight lines Alby Quote Link to comment Share on other sites More sharing options...
nova Posted March 25, 2004 Report Share Posted March 25, 2004 Try this. 4 oz. plastic 1/8 tsp blue highlite black glitter fine gold glitter Quote Link to comment Share on other sites More sharing options...
