rat Posted May 8, 2011 Report Share Posted May 8, 2011 How can I keep my paint to hold on my spinner blades and spoons I have been air brushing them and when I fish one time the paint come off. Quote Link to comment Share on other sites More sharing options...
cadman Posted May 8, 2011 Report Share Posted May 8, 2011 Clearcoat the entire head with Devcon 30 minute epoxy or Envirotex Lite. Will definitely make it harder and seal the paint. Quote Link to comment Share on other sites More sharing options...
Munkin Posted May 8, 2011 Report Share Posted May 8, 2011 Are you putting down a primer coat first? The two best ways I have found are to scuff up the blade and paint a primer base coat with some rattle can automobile primer, paint then clear. Option two is to powdercoat the blade but this isn't easy and takes some practice. In the end no paint will hold up to everything just like the spinnerbait head itself. Allen Quote Link to comment Share on other sites More sharing options...
sportsfisher Posted May 14, 2011 Report Share Posted May 14, 2011 scuff with scotch brite or sand paper before painting. Quote Link to comment Share on other sites More sharing options...
