BigRedfish Posted May 16, 2011 Report Share Posted May 16, 2011 I found a number of companies online that sell Hidebrandt spinners but can't locate the company that actually manufactures them. Anyone have any suggestions? Does anyone know of a company that makes a wire form that is close to the Hildebrandt Idaho Spinner? It appears they thread the clevis and blade onto a straight shaft and then make the final bend, forming the loop (line tie). Does anyone know of a automated tool that can do this do this? The gaol is to minimize labor behind a hand bender. Thoughts? Any light you could shed on these topics would be greatly appreciated. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted May 18, 2011 Report Share Posted May 18, 2011 (edited) Yakima owns the name now along with Poes, Wordens Rooster Tail, and others. I think you can buy something close to that Idaho spinner, I believe it may have been Barlows that had straight wire shafts with a snap like that. Edited May 18, 2011 by smalljaw Quote Link to comment Share on other sites More sharing options...
Fatman Posted May 27, 2011 Report Share Posted May 27, 2011 I make my own with a hand wire bender, I made about 100 in 2 hours the other night, you can make them straight or do a loop and make beetle spin frames also. Fatman Quote Link to comment Share on other sites More sharing options...
