Jump to content
Dan_T

My Winter Canoe Project

Recommended Posts

Thanks everyone for the kind replies. I really enjoyed this build. It is a stitch and glue design. The wood is 1/8" plywood covered inside and out with fiberglass cloth and many coats of epoxy. The canoe is 16 -1/2 feet and weighs 59 lb. I have approximately 85 labor hours in it not including drying times.

Link to comment
Share on other sites

Thanks everyone for the kind replies. I really enjoyed this build. It is a stitch and glue design. The wood is 1/8" plywood covered inside and out with fiberglass cloth and many coats of epoxy. The canoe is 16 -1/2 feet and weighs 59 lb. I have approximately 85 labor hours in it not including drying times.

Very nice! What kind of plywood? What weight cloth? Beam width? I'm asking because my strip pirogue weighs 54lbs., and I was wondering what the differance may be.

Great job the natural finish looks great.

beekeeper

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...
Top