DirtyT Posted June 9, 2011 Report Share Posted June 9, 2011 Hey guy, I have been lurking for some time now, soaking up info like a sponge....but Im about to buy my first aluminum mold and start injecting swim baits (I have been hand pouring RTV molds) so I have a question. I want to shoot two color baits, as well as solids so would the Bass Tackle twin injector be best...or two singles with a blending block? There may be no difference, just want to make sure before I click submit! Thanks Guys! Tony Quote Link to comment Share on other sites More sharing options...
GB GONE Posted June 9, 2011 Report Share Posted June 9, 2011 Well, the twinjector set-up gives you perfect laminates as they depress at the same time no matter what (you can loosen or take them apart if you want) whereas the seperate injectors will get close but it will depend more on you. Advantage of the seperate is that you can use the injectors for single colors easier where the twinjector is tougher to use for a single color. I actually use the twinjector for my laminates and a seperate injector for my single color runs. Not sure you can go wrong either way but the twinjector is pretty darn good! Jim Quote Link to comment Share on other sites More sharing options...
DirtyT Posted June 10, 2011 Author Report Share Posted June 10, 2011 Thanks Jim, I just found a video, that showed where you can take the Twin Injector apart...so a Twin Injector it is!!! Tony Quote Link to comment Share on other sites More sharing options...
