crzyjunyer Posted June 28, 2011 Report Share Posted June 28, 2011 i i am trying anything i can find to locate some ultra vibe spinnerbait blades in nickel, stainless, or brass colors. i have googled for a while with no luck except for one place in NC and when i went to order some they were out of business already - i have always loved thearrowhead design of the blad and prefer it on a thinner guage wire than most companies use for better action and have a coworker make my spinnerbaits for me - anyhelp will be much appreciated in my quest for these blades 1 Quote Link to comment Share on other sites More sharing options...
Madbasser Posted June 28, 2011 Report Share Posted June 28, 2011 http://www.tackleunderground.com/community/topic/19295-ultra-vibe-blades/ here is another thread. might give you answers. Basically, they are just not around anymore. Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted June 28, 2011 Author Report Share Posted June 28, 2011 http://www.tackleund...ra-vibe-blades/ here is another thread. might give you answers. Basically, they are just not around anymore. thanks for the help - i tried searching and found a few articles (not that one though) that kinda dashed my hopes but it was worth a shot to see if something had changed i guess - i found them at one called "bubbajackstackle" but they are now closed - i also tried calling them this afternoon and left a voicemail and maybe i will get a call back - i guess next i will email zoom about them - i dont care about the "ultra vibe" name i just want the arrowhead shape blades - i may just resort to finding some similar willow blades and doctoring them up with a grinder and file or something Quote Link to comment Share on other sites More sharing options...
reeves Posted June 29, 2011 Report Share Posted June 29, 2011 Not really familiar with the Ultra Vibe blade, but you describe it as arrowhead shaped and I remembered seeing these in my new catalog that I just received from Worth. Take a look, possibly these are what you are after. http://www.worthco.com/fish/serrated.html Good luck with your search. George Quote Link to comment Share on other sites More sharing options...
Fatman Posted July 1, 2011 Report Share Posted July 1, 2011 Sent you a PM Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted July 1, 2011 Author Report Share Posted July 1, 2011 reeves thatnks for the link - those are not quite what im looking for but i may order some to try and see how they do since it is diffrent from the normal willow blade and see what they can do - the ones im looking for are almost identical to a normal willow blade except at the base around the eyelet they indent in similar to the base of an arrowhead - most ive ever seen also are stamped "ultra vibe" into the blade as well near the eyelet fatman i got your PM and will be letting you know something shortly Quote Link to comment Share on other sites More sharing options...
smalljaw Posted July 1, 2011 Report Share Posted July 1, 2011 I may be mistaken but I think they are a war eagle product and there for won't be available for sale. Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted March 6, 2012 Author Report Share Posted March 6, 2012 i hope its ok with the webby if i relaod this topic - my apologies if its not - i was just wanting to check again and see if anyone had any possible results for some since its been a while since it was posted last and see if something new had been found on it or if a newer member may have some answers possible Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted October 20, 2012 Author Report Share Posted October 20, 2012 i was searching for these again online and still have not found any place to buy them (did find this thread in my search lol) and i noticed that even war eagle lures has discontinued their line of these blades on their lures too - i emailed war eagle yesterday about some info on these blades and im hoping to hear from them soon - so i figured i would check here agian too Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted February 16, 2016 Author Report Share Posted February 16, 2016 Im still looking for these blades. Any info on some would be wonderful and greatly apprciated. I have some pics but im not sure how to load them on here. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 16, 2016 Report Share Posted February 16, 2016 Im still looking for these blades. Any info on some would be wonderful and greatly apprciated. I have some pics but im not sure how to load them on here. Can you post a picture of the blade you're looking for? Quote Link to comment Share on other sites More sharing options...
smalljaw Posted February 16, 2016 Report Share Posted February 16, 2016 Those blades were used on a spinnerbait called the Georgia blade, they were made by a small company that has gone out of business. If you order enough you may be able to get Lakeland or Worth to produce them for you but I have no idea on how many you would need but I'm guessing a lot since a die would have to be made. Quote Link to comment Share on other sites More sharing options...
LimpNoodle Posted February 17, 2016 Report Share Posted February 17, 2016 Since you pay for the die the minimum order is not all the much. I know people who have had Hagen make a die. Minimum quantity was around 200. Of course the more you order the cheaper it will be. Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted February 17, 2016 Author Report Share Posted February 17, 2016 Mark how do i post pics? I have them on my phone. They are also posted on a similar post of bass recource. Smallljaw thank you for the lead. Im chasing it down now. As far as making them my best freind has offered me machine time on his waterjet or stamping machines if i paid for a die. Problem we are running into is worrying about patent/copyright infringement. Im hoping first to find origional maker and see if they either still make them or have a backstock. After that i will look more into having some made. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted February 17, 2016 Report Share Posted February 17, 2016 Mark how do i post pics? I have them on my phone. They are also posted on a similar post of bass recource. Smallljaw thank you for the lead. Im chasing it down now. As far as making them my best freind has offered me machine time on his waterjet or stamping machines if i paid for a die. Problem we are running into is worrying about patent/copyright infringement. Im hoping first to find origional maker and see if they either still make them or have a backstock. After that i will look more into having some made. Dude, I'm clueless when it comes to doing anything more than emailing pictures from my phone. My smart phone is smarter than I am. 1 Quote Link to comment Share on other sites More sharing options...
smalljaw Posted February 17, 2016 Report Share Posted February 17, 2016 Unless you plan on selling them you really don't have to worry about the patent. The other thing was that the spinnerbaits that used those blades were a regional bait only popular in a small area, so I doubt there is any patent but making them for yourself isn't an issue. 2 Quote Link to comment Share on other sites More sharing options...
crzyjunyer Posted February 18, 2016 Author Report Share Posted February 18, 2016 i actually got in touch with the guy behind georgia blade and was informed that the owner of zoom lures does in fact own the machine to make those blades. He tried to purchase the machine but the price was too high. I have an email into zoom now, but have not heard anything on it currently. I have heard zoom is often a pain to deal with if they feel a patent or design is infringed, so im not sure about making any right now. Quote Link to comment Share on other sites More sharing options...
