siebler_custom_baits Posted April 4, 2004 Report Share Posted April 4, 2004 AAAAAGHHHHHHHHHHHHHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! pouring some heads for the swap and my handels on my favorite mold gave way finally. anybody know where i can find handels for the mold and how much they cost? also, anybody have an alternative to use for the handels? thanks Quote Link to comment Share on other sites More sharing options...
deadlystreamer Posted April 4, 2004 Report Share Posted April 4, 2004 CJ, what's your molds look like. If they look like mine, you can use doweling, Drill it out and slip it over the handles, or heavy rubber hose will work too. Of course, it depends on what your molds are like. Good luck, it's hard to handle w/out handles. Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted April 4, 2004 Author Report Share Posted April 4, 2004 yea they were like beer tap handles. so are you saying drill into the dowling then put the bolt in there and glue it in? Quote Link to comment Share on other sites More sharing options...
deadlystreamer Posted April 5, 2004 Report Share Posted April 5, 2004 ahh CJ, If they are like a beer tap handle, I'd try a ACE Hardware or any hardware and just replace the handles with something of the same style. Now I'm not sure where they broke or what broke. but if it unscrews from your mold, it should be easy to improvise a handle. Just take the whole thing to your local hardware and see what he has to do the job. Good luck and please let me know if I'm barking up the wrong tree. Again, good luck!! Quote Link to comment Share on other sites More sharing options...
siebler_custom_baits Posted April 5, 2004 Author Report Share Posted April 5, 2004 sounds good. i got beer handels that would need longer bolts so i think i will do that. good thing dads in the co2 system business Quote Link to comment Share on other sites More sharing options...
