smalljaw Posted February 12, 2018 Report Share Posted February 12, 2018 What you need to do is shake the paint every now and again, and you should trim the tube so it only goes about half way in the powder. I really like my spray gun, I will get times it will stop and all I do is give it a shake to fluff the powder up and it is good to go for a bit. You'll notice some colors don't have any issues while others will settle faster and block the siphon tube, for those colors buy some clear powder, and add roughly a level table spoon to 2oz of your color and shake well to distribute the clear. This will keep the heavier colors from settling too fast. Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted February 13, 2018 Report Share Posted February 13, 2018 Good advice Smalljaw. Also I use less than 3psi. Usually around one or even lower. Works for me that way. And yes you have to shake them up once in awhile or they can stop flowing. Quote Link to comment Share on other sites More sharing options...
basscat28 Posted February 14, 2018 Report Share Posted February 14, 2018 I have shaken it a lot. Seems to shoot better with paint I bought off eBay or boss paints. I think I’ve narrowed it down the netcraft powder paint being the issue Quote Link to comment Share on other sites More sharing options...
