Gloomisman Posted October 6, 2011 Report Share Posted October 6, 2011 I'm looking at getting into some injection molds and wondering who all makes molds? Also, will most injectors fit other brands of molds? Here is a list of who I've found Caney Creek Bear Baits Del Mart Quote Link to comment Share on other sites More sharing options...
Frank Posted October 6, 2011 Report Share Posted October 6, 2011 Basstackle.com Bob Londe Quote Link to comment Share on other sites More sharing options...
Largehead Louie Posted October 6, 2011 Report Share Posted October 6, 2011 (edited) BASSTACKLE.COM Kmolds Angling AI Edited October 6, 2011 by Largehead Louie Quote Link to comment Share on other sites More sharing options...
Patrick Posted October 7, 2011 Report Share Posted October 7, 2011 (edited) Angling Al...? Any contact info?, Not familiar with them. Edited October 7, 2011 by Patrick Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted October 7, 2011 Report Share Posted October 7, 2011 Do yourself a favor and possibly save you some frustration and aggravation.........Before you order from whomever, Call and find out when your molds will be shipped. Seriously! 1 Quote Link to comment Share on other sites More sharing options...
Gloomisman Posted October 7, 2011 Author Report Share Posted October 7, 2011 Thanks Guys!! Bass Tackle has some really cool stuff. I'll check out some delivery times also. I've run into some issues with a mold maker before so that is great info also. Thanks. Quote Link to comment Share on other sites More sharing options...
Paul Mac Posted October 7, 2011 Report Share Posted October 7, 2011 All the orders I have had with -- > Caney Creek Molds ( Several molds, plastic, colors, glitter, clamps,etc. ), Bears baits ( two molds ), and Basstackle ( Twinjector ) have been very prompt and of excellent quality. Lurecraft --> Special powders - Glitter were also prompt and of excellent quality. They are the only people I have done business with. Quote Link to comment Share on other sites More sharing options...
DaBehr Posted October 8, 2011 Report Share Posted October 8, 2011 I've bought a lot of molds from Caney Creek and they have been excellent. Fast service, great guy to ask questions to. I've also bought some molds from Jacobs baits and they are top notch also. A word of "warning"...if you buy any of the bluegill/crappie baits then you MUST buy his injector because the sprue hold is very small. The good news is that the Jacobs bait injector also works with any other mold (the standard 5/8ths ) and has a locking nozzle which I really like. Knowing what I do now...I would have bought the Jacobs Bait injector first (I also have a Bear's Baits injector). I really like it and the Jacob Baits micro baits are excellent!! www.caneycreek.com http://stores.jacobsbaits.com Quote Link to comment Share on other sites More sharing options...
Frank Posted October 8, 2011 Report Share Posted October 8, 2011 I've bought a lot of molds from Caney Creek and they have been excellent. Fast service, great guy to ask questions to. I've also bought some molds from Jacobs baits and they are top notch also. A word of "warning"...if you buy any of the bluegill/crappie baits then you MUST buy his injector because the sprue hold is very small. The good news is that the Jacobs bait injector also works with any other mold (the standard 5/8ths ) and has a locking nozzle which I really like. Knowing what I do now...I would have bought the Jacobs Bait injector first (I also have a Bear's Baits injector). I really like it and the Jacob Baits micro baits are excellent!! www.caneycreek.com http://stores.jacobsbaits.com If you but Jacobs molds you dont NEED to buy his injector, he sells an adapter that you can use other injectors. I think it is around 10 bucks. The reason I say this is that if you want to use the Twinjector the adapter is a vital part in success. That said Jacobs injector tip is the most universal design out there and will work on more molds than any other. The tapered tip make it easy to go from onr mold to another without any hang ups. Frank Quote Link to comment Share on other sites More sharing options...
Largehead Louie Posted October 8, 2011 Report Share Posted October 8, 2011 Angling Al...? Any contact info?, Not familiar with them. http://www.anglingai.com/ Quote Link to comment Share on other sites More sharing options...
DaBehr Posted October 8, 2011 Report Share Posted October 8, 2011 I can't find any adapter on the Jacob's Baits website... But I would still pop for the injector...the locking tip is worth it. Quote Link to comment Share on other sites More sharing options...
Frank Posted October 9, 2011 Report Share Posted October 9, 2011 I can't find any adapter on the Jacob's Baits website... But I would still pop for the injector...the locking tip is worth it. He must have took it off. But he does have one, I to would still buy the injector. I have one with a bigger hole in the tip. The locking tip is always worth it. Quote Link to comment Share on other sites More sharing options...
cintaskevin Posted October 9, 2011 Report Share Posted October 9, 2011 I've bought from most every company listed here and have to say that Basstackle is by far the best when it comes to fast turnaround and great service. Quote Link to comment Share on other sites More sharing options...
Largehead Louie Posted October 14, 2011 Report Share Posted October 14, 2011 I've bought from most every company listed here and have to say that Basstackle is by far the best when it comes to fast turnaround and great service. Just got another mold delivered from Kevin today. Always quick shipping. Quote Link to comment Share on other sites More sharing options...
Gloomisman Posted October 24, 2011 Author Report Share Posted October 24, 2011 I just made an order to Bear. What a great place to deal with. I screwed up my internet order so i called and they fixed it and then explained eta of when to get my order. Sweet! Quote Link to comment Share on other sites More sharing options...
