chachybaby Posted November 4, 2011 Report Share Posted November 4, 2011 Hey guys, Wondering how everyone is organizing their silicone tabs and skirt tying materials? I have all these packs in a box and find its a mess and hard to keep track of all the different paterns and colors. I think there is too many to keep in a plano type box, that was my first idea. I would like to keep them organized by colour and not have them all mixed. thanks, C Quote Link to comment Share on other sites More sharing options...
Musky Glenn Posted November 4, 2011 Report Share Posted November 4, 2011 I have seen builders store them in zip Lock bags and hung on peg board. Very visible that way. Musky Glenn Quote Link to comment Share on other sites More sharing options...
bskizl Posted November 4, 2011 Report Share Posted November 4, 2011 i keep mine in a organizer that i got at Meijers. I think they sell them at walmart also. Made by a company named stack on i believe. They sell it in a few different configurations. I have 3 different ones two of them are the same they have 30 little slide out see through compartments that are about 1 1/2 x 6 inches. Tabs fit in there perfectly. I write the number of the tab on the front with a sharpie. The other one is the size of two of these stacked together. The top has 30 compartments the same as the other ones , but the bottom has 9 compartments that are about 4 inches wide by 6 inches deep by about 2 inches tall. These are great for storing your tools, completed jigs etc. As i recall the smaller ones were around $20.00 and the bigger one i don't remember the cost but i got it at Home Depot. Hope this helps. Quote Link to comment Share on other sites More sharing options...
RAWJigs Posted November 4, 2011 Report Share Posted November 4, 2011 I store mine in an organizer I got from Harbor Freight http://www.harborfreight.com/40-bin-organizer-with-full-length-drawer-94375.html The tabs dont fit perfectly, so I put one side of the tabs and let the other side hang high so when i put the drawer in it pushes that high side down. Quote Link to comment Share on other sites More sharing options...
smalljaw Posted November 5, 2011 Report Share Posted November 5, 2011 I use zip lock bags to put the tabs in and label them with were I got them from and the sku or catalog number, this way when I run out I know exactly were to go and what to get to restock. I keep the bags in 2 small rubbermaid bins and the bins are labeled with the colors that are in them and right now I have 87 different color tabs, some are actually the same color from different suppliers but they are different shades like green pumpkin, get green pumpkin from 3 different suppliers and more than likely you'll end up with 3 different shades of the same color. Quote Link to comment Share on other sites More sharing options...
chachybaby Posted November 5, 2011 Author Report Share Posted November 5, 2011 nice, thx guys Quote Link to comment Share on other sites More sharing options...
