Fishpro661199 Posted December 3, 2011 Report Share Posted December 3, 2011 Good morning, first time poster long time forum creeper. I've been hand pouring for roughly 5+ years now and I want to attempt the injection style pouring method. With all that being said, what injector's seem to work the best and what tips should I know before I start. I have a variety of molds that can accept an injector.. I know I am posting an open ended question, but I just wanted to ask all of you experienced gents for some pointers. Thanks!!! Jason Quote Link to comment Share on other sites More sharing options...
Jig Man Posted December 3, 2011 Report Share Posted December 3, 2011 There are several to choose from. I have 2 aluminum injectors with 2 different tips for each one a blending block and an adapter for some of the molds. What you need is to find out what works with your molds. Frank has several videos about injecting which can by example, help you way shorten the learning curve. You should be able to find the with a bit of searching on the soft plastic forum. Quote Link to comment Share on other sites More sharing options...
