Bester Posted January 13, 2012 Report Share Posted January 13, 2012 Couple of questions I hope you guys can help me with. 1- I have found some of my createx paints too thin right out of the bottle. Is there anything I can add to the paint to thicken it up? 2- When I push down on the airbrush trigger to get the air started some paint comes out when I haven't moved the trigger back to start paint flow. Not sure how to remedy that. Its an Iwata Revolution CR. Thanks for any advice Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted January 14, 2012 Report Share Posted January 14, 2012 It isn't the paint, It sounds like dried paint on the needle and it isn't seated right. Pull the needle and the caps and clean off/out the dried paint. Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted January 14, 2012 Report Share Posted January 14, 2012 If the Createx paints that are too thin are the fluorescent paints then I think that's just the nature of the beast. I don't know of anything that can be added to thicken them. And I agree with 152nd on the other problem. Ben Quote Link to comment Share on other sites More sharing options...
Bester Posted January 14, 2012 Author Report Share Posted January 14, 2012 thanks fellas Quote Link to comment Share on other sites More sharing options...
