sallystrothers Posted January 20, 2012 Report Share Posted January 20, 2012 Having difficulty in locating pre-made connector hardware for double pin joints. Does anyone have a good source? I have made some but they are extremely cumbersome the way I have been doing it. I have also ordered some figure 8's off netcraft but they are too short and also have an open end on one side. Thanks. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 21, 2012 Report Share Posted January 21, 2012 sallystrothers, Look for large, round bend sst snaps. Quote Link to comment Share on other sites More sharing options...
