mark poulson Posted January 27, 2012 Report Share Posted January 27, 2012 I need some fine #4 split rings for my spinnerbaits. Not a ton, just enough to let me replace some that are rusted, or that have opened over the years from changing blades. Do you guys have a source for only a couple of dozen at the most? Quote Link to comment Share on other sites More sharing options...
A.C.T. LURES Posted January 27, 2012 Report Share Posted January 27, 2012 Barlows carries them in smaller amounts up to size 3 http://www.barlowstackle.com/Split-Ring-Fine-P827.aspx I use the 2.5 on my spinnerbaits work perfect Paul Quote Link to comment Share on other sites More sharing options...
smalljaw Posted January 27, 2012 Report Share Posted January 27, 2012 Mark, I get mine from Barlows, I didn't check but I think they come in packs of 100 but aren't very expensive. Also, I use the Worth ball bearing swivels, those swivels use an oversize light wire split ring and I believe Barlows is the only supplier that you get the rings for that swivel. Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 27, 2012 Author Report Share Posted January 27, 2012 Thanks. I just ordered 100 of the #3 fine split rings. Quote Link to comment Share on other sites More sharing options...
JBlaze Posted January 29, 2012 Report Share Posted January 29, 2012 Mark, These two fellows are correct. I also use only Worth swivels and the # 2.5 fine split ring. Hope the #3 will work for you. John Quote Link to comment Share on other sites More sharing options...
mark poulson Posted January 30, 2012 Author Report Share Posted January 30, 2012 (edited) Thanks John. I'll let you know how they work when they get here. Edited January 30, 2012 by mark poulson Quote Link to comment Share on other sites More sharing options...
