JONC24FISH Posted March 3, 2012 Report Share Posted March 3, 2012 I AM LOOKING FOR AN ALUMINUM MOLD TO POUR MY OWN BULLET STYLE WEIGHTS. 1/4 3/8 1/2 3/4OZ SIZES ARE PREFFERED. THE DO-IT BRAND MOLDS DO NOT FIT MY NEEDS AND I CAN NOT GET A RESPONSE FROM SHAWN COLLINS CUSTOMS. ANY IDEAS ON A SUPPLIER? Quote Link to comment Share on other sites More sharing options...
SHK Posted March 3, 2012 Report Share Posted March 3, 2012 check Hilts Quote Link to comment Share on other sites More sharing options...
JONC24FISH Posted March 3, 2012 Author Report Share Posted March 3, 2012 THANKS I HAVE CHECKED HILTS AND THEY DO NOT MAKE THE SIZES NEEDED. HOPING SOMEONE HAS A SOURCE THAT IS NEW OR UNKNOWN. Quote Link to comment Share on other sites More sharing options...
pirkfan Posted March 3, 2012 Report Share Posted March 3, 2012 (edited) THANKS I HAVE CHECKED HILTS AND THEY DO NOT MAKE THE SIZES NEEDED. HOPING SOMEONE HAS A SOURCE THAT IS NEW OR UNKNOWN. Just looked at the Hilts mold site, and although you'd have to buy two molds to cover your bases, their site says they DO have molds that cast those sizes. Would still be way cheaper than a SC or custom mold. http://www.hiltsmold...SinkerMolds.htm Edited March 3, 2012 by pirkfan Quote Link to comment Share on other sites More sharing options...
SHK Posted March 3, 2012 Report Share Posted March 3, 2012 Just looked at the Hilts mold site, and although you'd have to buy two molds to cover your bases, their site says they DO have molds that cast those sizes. Would still be way cheaper than a SC or custom mold. http://www.hiltsmold...SinkerMolds.htm thought they had them. Quote Link to comment Share on other sites More sharing options...
Saugerman Posted March 4, 2012 Report Share Posted March 4, 2012 I have a hilts bullet mold that makes 3/4 and 1 oz worm sinkers. Quote Link to comment Share on other sites More sharing options...
robalo01 Posted March 4, 2012 Report Share Posted March 4, 2012 I have tried used just about all of the out there except Collins, and they are crap (LilMack included). I would love to buy one of Collins molds, but he never answers his email or phone, so I dont really trust sending him money. What I wound up doing is buyin blank lee molds and cutting my own concave work weights. They work breat even at one cavity per casting. I can make about 250 per hour. And since I polished out the cavities they really shine. I cut the cavities with my drill press (shaped the bits on a belt sander). I had to have the the concave portion turned at a local machine shop. Quote Link to comment Share on other sites More sharing options...
Rustyfawcett Posted July 10, 2017 Report Share Posted July 10, 2017 On 3/3/2012 at 9:06 PM, robalo01 said: I have tried used just about all of the out there except Collins, and they are crap (LilMack included). I would love to buy one of Collins molds, but he never answers his email or phone, so I dont really trust sending him money. What I wound up doing is buyin blank lee molds and cutting my own concave work weights. They work breat even at one cavity per casting. I can make about 250 per hour. And since I polished out the cavities they really shine. I cut the cavities with my drill press (shaped the bits on a belt sander). I had to have the the concave portion turned at a local machine shop. Would you post pic please . I also am unable to reach Collins. Quote Link to comment Share on other sites More sharing options...
Cami Posted July 10, 2017 Report Share Posted July 10, 2017 (edited) Here you are an European (German) solution. https://www.bleigussformen-shop.de/navi.php?qs=bullet Bye. Cami Edited July 10, 2017 by Cami 1 Quote Link to comment Share on other sites More sharing options...
