Painter1 Posted March 17, 2012 Report Share Posted March 17, 2012 I need to make a raised pedestal for my presto pots. Anyone have a specific design that works well? I want ro cantilever the spout over the edge of the workbench so I can pour directly into an injector Quote Link to comment Share on other sites More sharing options...
Kajan Posted March 17, 2012 Report Share Posted March 17, 2012 If you make the base 15" long from back to front, you want 3/4"-1" slope. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted March 17, 2012 Report Share Posted March 17, 2012 I made a metal platform to hold two pots side by side. They slope forward with the help of aluminum tubing that replaces the feet. It is 3/4" in the back and 1/2" in the front. The platform is mounted to a trailer jack that is mounted to the table so I can raise or lower the pots to accommodate different height molds. Quote Link to comment Share on other sites More sharing options...
Painter1 Posted March 19, 2012 Author Report Share Posted March 19, 2012 Great information. Thanks guys. I am having a hard time picturing the trailer jack/platform rig Quote Link to comment Share on other sites More sharing options...
Basseducer Posted March 19, 2012 Report Share Posted March 19, 2012 I'm having trouble posting a pic. Send me your email and i"ll send it to you. Then maybe I can figure this thing out. Quote Link to comment Share on other sites More sharing options...
Basseducer Posted March 19, 2012 Report Share Posted March 19, 2012 (edited) Lets see if this works. http://www.tackleund...-poring-set-up/ That's pouring set-up. Edited March 19, 2012 by Basseducer Quote Link to comment Share on other sites More sharing options...
