robbor Posted March 22, 2012 Report Share Posted March 22, 2012 Id like to try a resin mold, im wondering what can be used to make a form? I think metal is out since i need the form to be roughly 17" by 4" and i have not mound anything even close. Quote Link to comment Share on other sites More sharing options...
Kajan Posted March 22, 2012 Report Share Posted March 22, 2012 You can use all kind of differant material. But some place on the forum you can find a pic of my Galv Metal trays I fabricated to make Resin and RTV molds. I make the pans to fit the lure master I am molding, this way I can use minimal materials needed.You just have to make sure its beveled on all 4 sides. Just remember, a pan to make a mold does not have to be standard square or rectangular shaped. Quote Link to comment Share on other sites More sharing options...
Jig Man Posted March 22, 2012 Report Share Posted March 22, 2012 I usually go to the baking section in a place like Wal-Mart and get a non stick pan. Quote Link to comment Share on other sites More sharing options...
oksparks Posted March 22, 2012 Report Share Posted March 22, 2012 (edited) I use corrugated plastic sheet. Cut it to shape/lengths needed and glue to glass or plexiglass. works great. I use hot glue. Edited March 22, 2012 by oksparks Quote Link to comment Share on other sites More sharing options...
texasbass1 Posted March 26, 2012 Report Share Posted March 26, 2012 I've used the aluminum baking pans for my resin molds, glue down the masters once your done just cut the pan away from the mold Quote Link to comment Share on other sites More sharing options...
