macstackleman Posted March 27, 2012 Report Share Posted March 27, 2012 Does anyone have a easy way to twist a hitchiker with a centering pin? Love the pin for aligning plastics. Thanks Quote Link to comment Share on other sites More sharing options...
cadman Posted March 27, 2012 Report Share Posted March 27, 2012 It's cheaper to buy them then to make them. Been there done that. PM me if you want more info. Quote Link to comment Share on other sites More sharing options...
JBlaze Posted March 27, 2012 Report Share Posted March 27, 2012 It is easier to buy them than to make them but if you want to give it a try, here is something I came up with some time back, if you would like to try making your own. John http://www.tackleunderground.com/community/topic/16840-making-a-starter-stud-corkscrew/page__fromsearch__1 Quote Link to comment Share on other sites More sharing options...
Dink Master Posted March 28, 2012 Report Share Posted March 28, 2012 I have used JBlaze method, easy & cheap. Give it a try. Quote Link to comment Share on other sites More sharing options...
macstackleman Posted March 28, 2012 Author Report Share Posted March 28, 2012 Thanks everyone, Jblaze great info. Thanks again!! Quote Link to comment Share on other sites More sharing options...
JBlaze Posted March 28, 2012 Report Share Posted March 28, 2012 Thanks everyone, Jblaze great info. Thanks again!! Your Welcome Quote Link to comment Share on other sites More sharing options...
mark poulson Posted March 29, 2012 Report Share Posted March 29, 2012 I carry a small piece of spinnerbait wire to stick into the soft plastic first, to act as a guide for the hitchhikers. It works, but not as well as the ones with the centering pins. Quote Link to comment Share on other sites More sharing options...
