atijigs Posted March 28, 2012 Report Share Posted March 28, 2012 This is a great site. Any questions or problems I can come up with have been addressed or are already being discussed. It can be related to other areas as well. The atv had a glitch where the high and low beams could be on at the same time. The solder connection would over heat,melt and the bulbs would drop off in the plastic head light housing. According to the owners manual I would have to take the whole front end apart to get the head light covers off to remove the separated bulbs. Went to a shop that serviced the atv. I told them my problem and they said blow compressed air in the back and the bulb will pop right out of the hole. It worked. Two minutes vs 1/2 a day. I want to thank everyone on this site for their insight. I wish I would have found it sooner. For the most part I can only share my mistakes. Quote Link to comment Share on other sites More sharing options...
