Kasilofchrisn Posted April 17, 2012 Report Share Posted April 17, 2012 So I just ordered some of frankford arsenals drop out because I was having a problem with some of my molds filling out. I read on here that this is going to help with this problem. When I spray it on do I just spray both mold halves or should I only spray the mold cavities? As I understand it I can use steel wool to remove it from any area I do not want it right? Thanks Chris Quote Link to comment Share on other sites More sharing options...
cadman Posted April 17, 2012 Report Share Posted April 17, 2012 Chris, Clean you mold cavities with mineral spirits or lacquer thinner to remove and oil or grease. Once dry, you can either spray both mold halves or just the cavities. I like to only spray the cavities, by taping everything else off. This is your choice. On areas you want to clean, I wouldn't use steel wool. Lacquer thinner or mineral spirits will take it off easily. Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted April 17, 2012 Author Report Share Posted April 17, 2012 Thanks. Its good to know how to remove it. I will be sure and pick up some mineral spirits. Quote Link to comment Share on other sites More sharing options...
