ING Posted June 9, 2012 Report Share Posted June 9, 2012 Where I could buy "eye balls" like on the Prism Eye Spinner ?http://store.fishcreekspinners.com/servlet/Detail?no=472 Thank you Quote Link to comment Share on other sites More sharing options...
Kasilofchrisn Posted June 10, 2012 Report Share Posted June 10, 2012 Barlows has them. 1/8" up to 5/8" I use them and they are good. I coat mine with devcon because I dont trust the sticky backs 100%. http://www.barlowsta...ch-P973C38.aspx Quote Link to comment Share on other sites More sharing options...
RayburnGuy Posted June 10, 2012 Report Share Posted June 10, 2012 There are numerous dealers who carry the 3D prism eyes. Several of whom are supporters of TU. You might consider taking a look at the "Suppliers" at the top of the page. Boggs...Predator.....Lurecraft....are just a few that come to mind. Ben Quote Link to comment Share on other sites More sharing options...
BLT Posted June 11, 2012 Report Share Posted June 11, 2012 I order right from WTP lure eyes. Have to buy in bulk if I remember right. Quote Link to comment Share on other sites More sharing options...
ING Posted June 11, 2012 Author Report Share Posted June 11, 2012 (edited) Thank you, guys, for respond! When I've looked picture on http://store.fishcre...t/Detail?no=472 I've decided that Prizm Eye has a spheroid shape and made like one piece. Probably I was mistaken. Are they applying adhesive flat 3D Prizm Eyes on the some bid with hole inside? What do you think? Thank you Edited June 11, 2012 by ING Quote Link to comment Share on other sites More sharing options...
smalljaw Posted June 11, 2012 Report Share Posted June 11, 2012 Thank you, guys, for respond! When I've looked picture on http://store.fishcre...t/Detail?no=472 I've decided that Prizm Eye has a spheroid shape and made like one piece. Probably I was mistaken. Are they applying adhesive flat 3D Prizm Eyes on the some bid with hole inside? What do you think? Thank you If you take a look at the spinner in the bottom right of the thumb nails it is easy to see what they did. What you are looking at is an oval glass or plastic bead with flat sides and on it they used an normal 3D eye that you can get in various sizes. It isn't a single piece and if it is the entire oval bead with the eye that you want then you will have to find the oval plastic or glass bead and then buy the 3D eye seperate. Quote Link to comment Share on other sites More sharing options...
ING Posted June 11, 2012 Author Report Share Posted June 11, 2012 If you take a look at the spinner in the bottom right of the thumb nails it is easy to see what they did. What you are looking at is an oval glass or plastic bead with flat sides and on it they used an normal 3D eye that you can get in various sizes. It isn't a single piece and if it is the entire oval bead with the eye that you want then you will have to find the oval plastic or glass bead and then buy the 3D eye seperate. Thank you! I already got it. I will use a brass bids with two filed sides. I need to increase weight . Quote Link to comment Share on other sites More sharing options...
