DJR Posted June 11, 2012 Report Share Posted June 11, 2012 I have never hand poured or injected plastic baits. This forum has been very helpful from a beginner's perspective. I plan on hand pouring into self-made 2-part molds made of water putty and heat the plastisol in a microwave. The baits will ultimately be utilized for panfish and bass. I need further direction concerning selecting a particular companies plastic. Who would you suggest based on my aformentioned factors (beginner necessitates ease of use, hand pouring, heated via a microwave)? In addition, price is certainly a factor to consider, but not the most important towards selecting which plastisol. Thanks. Ron Quote Link to comment Share on other sites More sharing options...
XFactorTackle Posted June 11, 2012 Report Share Posted June 11, 2012 In my opinion, I think Caney Creek is the best for anyone using 5 gallons or less at a time. It has a simple pour spout on it and it doesn't hard pack like some of the other types out there so you don't need a mixer. Also, I don't like dealing with 5 gallon buckets if I can avoid it, Caney Creek has a pretty slick bag in a box setup that eliminates the bucket all together so you don't have to worry about wasting plastic as it spills down the sides or on the floor. Anyway, that's my 2 cents. 1 Quote Link to comment Share on other sites More sharing options...
Gloomisman Posted June 11, 2012 Report Share Posted June 11, 2012 In my opinion, I think Caney Creek is the best for anyone using 5 gallons or less at a time. It has a simple pour spout on it and it doesn't hard pack like some of the other types out there so you don't need a mixer. Also, I don't like dealing with 5 gallon buckets if I can avoid it, Caney Creek has a pretty slick bag in a box setup that eliminates the bucket all together so you don't have to worry about wasting plastic as it spills down the sides or on the floor. Anyway, that's my 2 cents. I'll agree with that. Quote Link to comment Share on other sites More sharing options...
jeff@mf Posted June 11, 2012 Report Share Posted June 11, 2012 (edited) Heck pay for shipping I will give you a pint for free, can't beat that. 817-281-9488. it comes in a bottle not a bag though if that's your deciding point. I personally don't like my wine or plastic in a bag. All plastic will settle giving the length of time and I'm sure at one point that valve will clog. just my 2 cents. Jeff@mf, I'm having a pretty good Monday I might pay for shipping too! Edited June 11, 2012 by jeff@mf 2 Quote Link to comment Share on other sites More sharing options...
carolinamike Posted June 11, 2012 Report Share Posted June 11, 2012 Plastisol is something you need to form your own opinion about. No one company's plastisol is better than the other, plastisol is all about which one works best for you. My suggestion is to get a small sample of all the plastisols out there and see which one you like the best. Here is a list of other companies, some may give you a small free sample and some will want you to pay for it. When you try them be sure and post and let us all know which one you liked and why Lureworks- spikeit.com Bear Baits MF manufactoring Lurecraft All of these folks have good plastisol, some just work better than others for certain applications. Just remember that its all about what works best for you. Quote Link to comment Share on other sites More sharing options...
DJR Posted June 11, 2012 Author Report Share Posted June 11, 2012 Thanks for everyone's input. I contacted the companies mentioned for a free sample as recommended. It seems from your responses and older posts that like a lot of things in life is a matter of personal choice as opposed to something being the end all/ be all. Quote Link to comment Share on other sites More sharing options...
BBK Posted June 11, 2012 Report Share Posted June 11, 2012 Every plastisol is a little different, some smoke less than others, some have less of an odor than others, some are clearer than others, some have less bubbles than others, some do not need as much mixing than others, and some are thinner than others. You have to try them all and see which has the most positives for what you are looking for. 1 Quote Link to comment Share on other sites More sharing options...
Sonny.Barile Posted June 13, 2012 Report Share Posted June 13, 2012 I have a question........Which plastisol could I use in my kitchen without my wife murdering me afterwards? Sonny Quote Link to comment Share on other sites More sharing options...
jeff@mf Posted June 13, 2012 Report Share Posted June 13, 2012 Not a good idea with any brand! Even burned popcorn is not good inside the house. Find a shed or garage please to help with any problems; dogs, children, wife, yourself not to mention painted walls and ceilings, plants you get the point. Every brand has PVC in it and if you burn it that’s not good, I don't care if its green plastisol it will not be so green if you over cook it over even correctly it will put off unneeded fumes. jeff@mf 1 Quote Link to comment Share on other sites More sharing options...
carolinamike Posted June 13, 2012 Report Share Posted June 13, 2012 Jeff is definitely right. You do not want to make worms in your house, even in a garage or outdoor building I would still use some type of ventilation. If you accidently burn the plastisol to the point that it turns black and spongy, do not and I repeat do not, open your microwave for an hour or so. When plastisol is burnt to this point the fumes off of it become a type of acid and will cause a lot of severe damage to soft tissue, such as your eyes, your lungs, your sinuses. I made this mistake one time. I immediately exited my building and didn't go back in for an hour or so. When I did go back in to check on things, you should see how bad it stained an aluminum mold. I just couldn't imagine this being my eyes or lungs. So always keep safety in mind, chemical pneumonia will kill you. Quote Link to comment Share on other sites More sharing options...
