mrbass Posted June 11, 2012 Report Share Posted June 11, 2012 I am going to buy a new mold that will inject more than 4 baits at a time. I am thinking ten or twelve. Just looking for hints on whos mold and how many baits a a time you folks have had luck with. Quote Link to comment Share on other sites More sharing options...
MonteSS Posted June 11, 2012 Report Share Posted June 11, 2012 (edited) My bears 5" stick mold makes 5 baits and uses up most of the bears 5 oz injector. 10 or 12 cavity would need real big injector. Dels makes them but good luck finding one ...Bill Edited June 12, 2012 by MonteSS Quote Link to comment Share on other sites More sharing options...
MonteSS Posted June 12, 2012 Report Share Posted June 12, 2012 Caney Creek has a new 9.5 oz injector. http://www.caneycreekmolds.com/Large-Injector--95-oz_p_346.html ....Bill Quote Link to comment Share on other sites More sharing options...
Romeo D Posted June 12, 2012 Report Share Posted June 12, 2012 You can always get a few more 4 or 5 cavity stick molds and be able to produce quite a bit. I think it would be easier to handle than a larger mold. Quote Link to comment Share on other sites More sharing options...
Frank Posted June 12, 2012 Report Share Posted June 12, 2012 I agree with both of you. Opening a mold is how I base my pricing. But one thing is the sprue five cavitys one large sprue or ten cavitys sharing one sprue head to head Don't think I have seen a stick mold designed like that. Laminate waste would be half. This is another thing to think of. Frank Quote Link to comment Share on other sites More sharing options...
