J lure Posted June 12, 2012 Report Share Posted June 12, 2012 What's my options for molds for lead jigs and for pouring my own swim bait hooks and such. I'm looking for custom work. The only company I can find is Shawn Collins but having contacting issues. I know this isn't a soft plastic topic but you guys know you molds. Quote Link to comment Share on other sites More sharing options...
Maurizio Posted June 12, 2012 Report Share Posted June 12, 2012 Have you thought about RTV-molds? You probably did... unfortunately i only know a guy in europe who do custom lead molds, but i am sure other members might help you. 1 Quote Link to comment Share on other sites More sharing options...
Paxamus Posted June 14, 2012 Report Share Posted June 14, 2012 PM sent, I make RTV Molds 1 Quote Link to comment Share on other sites More sharing options...
smallmouthaholic Posted June 14, 2012 Report Share Posted June 14, 2012 PM sent, I make RTV Molds High temp RTV silicone is good to 560 degrees . Molden lead exceesd that temp. Quote Link to comment Share on other sites More sharing options...
Paxamus Posted June 14, 2012 Report Share Posted June 14, 2012 High temp RTV silicone is good to 560 degrees . Molden lead exceesd that temp. True but I guess it is how quick it cools that makes ok. I had the same concerns when I started making them but each one is still good after hundreds of pours. Quote Link to comment Share on other sites More sharing options...
dj thrillz Posted June 14, 2012 Report Share Posted June 14, 2012 I use AeroMarines AM160 rtv silicone for making my custom heads, It takes the heat no problem. But, Its on the stiff side. Its not too flexible, so its likely to tear at some point. Quote Link to comment Share on other sites More sharing options...
Maurizio Posted June 15, 2012 Report Share Posted June 15, 2012 I do use RTV that is heat resistent up to 750-840°F (of course not permanently) and is made for lead molds. I don't know if there is a similar product in the US. Quote Link to comment Share on other sites More sharing options...
Paxamus Posted June 15, 2012 Report Share Posted June 15, 2012 Here are some of mine 1 Quote Link to comment Share on other sites More sharing options...
