jburns1510 Posted June 13, 2012 Report Share Posted June 13, 2012 What is best for clear coats? I was thinking about automotive clear coat but i don't know how it yellows or durability. I know D2T works good but i don't want to have to wait a week before i use my baits. A guy on another forum mentioned Sally Hasen Hard as Nails. Does anyone have any experience with this? Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 13, 2012 Report Share Posted June 13, 2012 I use the Sally Hansen polish, but I am only making baits for myself. Quote Link to comment Share on other sites More sharing options...
jburns1510 Posted June 14, 2012 Author Report Share Posted June 14, 2012 I am only making for myself also. How is the durability of it? Quote Link to comment Share on other sites More sharing options...
Richard Prager Posted June 14, 2012 Report Share Posted June 14, 2012 I use the hard as nails for the knots on hand tied skirts. If you use D2T for the clear coat on the lead, you should be able to use them within 24 hours or less. Quote Link to comment Share on other sites More sharing options...
cadman Posted June 14, 2012 Report Share Posted June 14, 2012 I use the hard as nails for the knots on hand tied skirts. If you use D2T for the clear coat on the lead, you should be able to use them within 24 hours or less. x2, if you want to play it safe two days at the most for D2T. You can also use e-tex which goes on clearer. Quote Link to comment Share on other sites More sharing options...
BassBull Posted June 14, 2012 Report Share Posted June 14, 2012 Good guestion with a lot of differant ways to do something. I use Devcon 2T on all my lures and it is about as good as it gets. If you use it you will have to have a turner that rotates at about 7 to 9 revilutions (spelling?) per min. The mixture will run on you. They are easy to make, just look up in the history section about this subject. Good luck STEVE Quote Link to comment Share on other sites More sharing options...
mark poulson Posted June 15, 2012 Report Share Posted June 15, 2012 I am only making for myself also. How is the durability of it? It's held up fine for me. Quote Link to comment Share on other sites More sharing options...
